fbpx

Automation and Integration

Automation and Integration

roller_06

The following options are the most common choices to power motorized window coverings. For more sophistacated automation and integration options please call our technical department.

 

Wirefree 12 V Motors

Features & Benefits:
• Battery operated (8AA lithium batteries can be purchased anywhere).
• No wires to conceal.
• No electrician required.
• RTS compatible – See control options (page 54). Plug-in transformer optional.
• Easy to install.

Recommended Uses:
• Residential projects requiring a small number of window coverings.
• In areas where access to electrical wiring is not possible.
• Smaller size window coverings and lighter fabrics.

Products Supported:
• Roller Shades
• Roman Shades

Wirefree Roller Shade Motor Option: LT30 12V
• Includes motor, necessary crowns and drives, and mounting brackets.
• Minimum width is 16”.
• Lift weight 12lbs.

Wirefree Roman Shade Motor Option: CT32 12V
• Includes motor, drive shaft, and mounting brackets.
• Minimum width is 24”.
• Lift weight 8lbs.

Power Options for LT30 and CT32:
• 12V Reloadable Lithium Battery Tube – Powers 1 Motor
• 12V Reloadable Lithium Battery Tube Pre-loaded with 8 AA Batteries – Powers 1 Motor
• 12V DC 1.25A Transformer (Wall Type) – Powers 1 Motor

Plug-In Power Motors

Features & Benefits:
• The motor plugs directly into a standard electrical outlet.
• The window covering can be serviced without an electrician.
• DC option comes with a 2 prong plug with transformer.
• AC option comes with a 3 prong plug.
• An electrician may be required depending on the location of the electrical outlet. 3’ to 24’ cables are optional.
• RTS compatible – See control options below.
• Cables are visible.

Recommended Uses:
DC (low-voltage) • Mainly residential and some commercial projects where the power is not accessible by the general public.
• Smaller size window covering and lighter fabrics or woods.
• Applications that require smaller headboxes or valances under 3” x 3”.
• When window coverings are close to an existing electrical outlet there is no need for an electrician.
AC
• Residential or commercial applications.
• Most size window coverings and heavier fabrics.
• Applications that can accommodate headboxes larger than 3” x 3”.
• When window coverings are close to an existing electrical outlet there is no need for an electrician.

Products Supported:
DC (low-voltage)
• Roller Shades
• Panel Tracks
• Roman Shades
• 2” Horizontal Blinds (wood)
• Drapery
AC
• Roller Shades (single and multi-banded)

Plug-In Roller Shade and Wood Horizontal Motor Option: Sonesse 30
• Includes motor, necessary crowns and drives, and mounting brackets.
• Minimum width is 19″.
• Lift Weight 18lbs.

Power Options for Sonesse 30
24V DC 1.66A Transformer (Wall Type) – Powers 1 Motor
24V DC 2.5A Transformer (Table Type) – Powers 1 Motor
24V DC 5A Transformer DC3 – Powers 3 Motors
24V DC 10A Transformer DC6 – Powers 6 Motors
24V DC 15A Transformer DC9 – Powers 9 Motors
24V DC 20A Transformer – Powers 12 Motors

Hardwired Power Motors (with bare wire)

Features & Benefits:
• The motor is wired into the home/building’s electrical system.
• Both RTS and non-RTS compatible.
• Wires are concealed behind the walls.
• DC option is wired into a power supply/transformer.
• AC option is wired into a junction box by an electrician.

Recommended Uses
DC (low voltage)
• Mainly residential and some commercial applications.
• Smaller size window covering and lighter fabrics or woods.
• Applications that require smaller headboxes or valances under 3” x 3”.
• When integrating into a home/building automation system.
AC
• Residential or commercial applications.
• Most size window coverings and heavier fabrics.
• Applications that can accommodate headboxes larger than 3” x 3”.
• Applications requiring RTS and non-RTS controls.
• When integrating into a home/building automation system.

Products Supported:
DC (low-voltage)
• Roller Shades
• Panel Tracks
• Roman Shades
• 2” Horizontal Blinds (wood)
• Drapes
AC
• Roller Shades (single and multi-banded)

Hardwire Roller Shade Motor Option: Sonesse 50 (Quiet Motor)
• Includes motor, 6’ of 4 conductor barewire, necessary crowns and drives, and mounting brackets.
• Minimum width is 39”.
• Lift weight 35bs.

-or-
Hardwire Roller Shade Motor Option: Standard Non-RTS
• Includes motor, 6’ of 4 conductor barewire, necessary crowns and drives, and mounting brackets.

• Non-RTS – 4Nm (Minimum width is 28”)
• Non-RTS – 6Nm (Minimum width is 32”)
• Non-RTS – 10Nm (Minimum width is 36”)
Lift weight: 35lbs
Lift weight: 52lbs
Lift weight: 88lbs
Power Options for Sonesse 50:
• Optional 4 Conductor Bare Wire Cables 12’ and 24’ Lengths

Additional Options
• Paddle Switch with Plate (max. 2 motors per switch)

Drapery or Panel Track

• Includes track made to your measurements, 3 carriers per ft., motor and 24V DC plug-in transformer with a 15’ cord and 10” extension.
• For pleat pinch drapery, please call for availability.
• Available in split draw and side draw.
• Call for curved track (45° or 90° curves only).
• Available in white finish only.

RTS Control Options

Telis 1 & 4 Channel RTS Remote

Available in Pure, Silver, and Lounge finishes

Telis Modulis 4 Channel RTS Remote with Scroll Wheel

Available in Silver, and Lounge finishes

Telis Composio 20 Channel RTS Remote

Available in Pure, Silver, and Lounge finishes

Telis Impressario Chronis RTS Remote

Available in Pure, Silver, and Lounge finishes

Sunis Wireless Sun Sensor

Available in White finish

Decoflex 1 & 4 Channel RTS Wall Switch

Available in White, Ivory, and Black finishes

Chronis Comfort RTS 24/7 Wirefree Timer Wall Switch

Available in White finish

Sun Sensor Cable for Chronis Comfort RTS Wall Switch

Available in White finish

We Are Always Ready To Help You!