Features & Benefits:
• The motor plugs directly into a standard electrical outlet.
• The window covering can be serviced without an electrician.
• DC option comes with a 2 prong plug with transformer.
• AC option comes with a 3 prong plug.
• An electrician may be required depending on the location of the electrical outlet. 3’ to 24’ cables are optional.
• RTS compatible – See control options below.
• Cables are visible.

Recommended Uses:
DC (low-voltage) • Mainly residential and some commercial projects where the power is not accessible by the general public.
• Smaller size window covering and lighter fabrics or woods.
• Applications that require smaller headboxes or valances under 3” x 3”.
• When window coverings are close to an existing electrical outlet there is no need for an electrician.
AC
• Residential or commercial applications.
• Most size window coverings and heavier fabrics.
• Applications that can accommodate headboxes larger than 3” x 3”.
• When window coverings are close to an existing electrical outlet there is no need for an electrician.

Products Supported:
DC (low-voltage)
• Roller Shades
• Panel Tracks
• Roman Shades
• 2” Horizontal Blinds (wood)
• Drapery
AC
• Roller Shades (single and multi-banded)

Plug-In Roller Shade and Wood Horizontal Motor Option: Sonesse 30
• Includes motor, necessary crowns and drives, and mounting brackets.
• Minimum width is 19″.
• Lift Weight 18lbs.

Power Options for Sonesse 30
24V DC 1.66A Transformer (Wall Type) – Powers 1 Motor
24V DC 2.5A Transformer (Table Type) – Powers 1 Motor
24V DC 5A Transformer DC3 – Powers 3 Motors
24V DC 10A Transformer DC6 – Powers 6 Motors
24V DC 15A Transformer DC9 – Powers 9 Motors
24V DC 20A Transformer – Powers 12 Motors

Features & Benefits:
• The motor is wired into the home/building’s electrical system.
• Both RTS and non-RTS compatible.
• Wires are concealed behind the walls.
• DC option is wired into a power supply/transformer.
• AC option is wired into a junction box by an electrician.

Recommended Uses
DC (low voltage)
• Mainly residential and some commercial applications.
• Smaller size window covering and lighter fabrics or woods.
• Applications that require smaller headboxes or valances under 3” x 3”.
• When integrating into a home/building automation system.
AC
• Residential or commercial applications.
• Most size window coverings and heavier fabrics.
• Applications that can accommodate headboxes larger than 3” x 3”.
• Applications requiring RTS and non-RTS controls.
• When integrating into a home/building automation system.

Products Supported:
DC (low-voltage)
• Roller Shades
• Panel Tracks
• Roman Shades
• 2” Horizontal Blinds (wood)
• Drapes
AC
• Roller Shades (single and multi-banded)

Hardwire Roller Shade Motor Option: Sonesse 50 (Quiet Motor)
• Includes motor, 6’ of 4 conductor barewire, necessary crowns and drives, and mounting brackets.
• Minimum width is 39”.
• Lift weight 35bs.

-or-
Hardwire Roller Shade Motor Option: Standard Non-RTS
• Includes motor, 6’ of 4 conductor barewire, necessary crowns and drives, and mounting brackets.

• Non-RTS – 4Nm (Minimum width is 28”)
• Non-RTS – 6Nm (Minimum width is 32”)
• Non-RTS – 10Nm (Minimum width is 36”)
Lift weight: 35lbs
Lift weight: 52lbs
Lift weight: 88lbs
Power Options for Sonesse 50:
• Optional 4 Conductor Bare Wire Cables 12’ and 24’ Lengths

Additional Options
• Paddle Switch with Plate (max. 2 motors per switch)

• Includes track made to your measurements, 3 carriers per ft., motor and 24V DC plug-in transformer with a 15’ cord and 10” extension.
• For pleat pinch drapery, please call for availability.
• Available in split draw and side draw.
• Call for curved track (45° or 90° curves only).
• Available in white finish only.